Untitled Document

INDEX OF TERMS
S

[A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M]
[N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z]

Terms are listed in alphabetical order, with reference to the number of the subchapter(s) where they can be found. Clicking on a term loads the appropriate section pdf file. If a term is not a separate entry, the entry at which it can be found is given in parentheses. Terms marked with an asterisk ( *) are not recommended.

s - s transition 11.2
SAED* (see THEED 17.3)
Saha-Eggert's law 10.3.1.1.1
Saliva 19.2.1
Salt form of an ion exchanger 9.2.5.3
Salting out 9.4.1
SAM 17.2.4
Sample 5.2.2;   9.2.1.1;   18.3.2; 18.8.1
- air 19.3.1
- cell 10.3.5.1.2
- - holders 10.3.5.1.2
- combined 18.3.4
- components 9.2.1.1
- composite 10.3.4.9.1
- convenience 18.3.4
- deposition temperature 10.3.4.5.3
- - time 10.3.4.5.3
- duplicate 18.3.4
- electrode 10.3.4.1
- errors 10.3.5.2.10
- handling 7.3
- holder 5.2.2
- homogeneous 10.3.4.7.2
- injector 9.2.2.1;   9.2.7.3;   10.3.4.5.3
- introduction hole 10.3.4.5.2
- line 19.3.1
- modified 18.3.4
- point 19.3.1
- primary 18.3.6
- probe 19.3.1
- random 18.3.4
- reduced 18.3.6
- referee 18.3.4
- replicate 18.3.4
- representative 18.3.4
- reserve 18.3.4
- selective 18.3.4
- sequential 18.3.4
- solution 10.3.4.9.5;   10.3.1.4.4
- stratified 18.3.4
- support 10.3.4.5.2
- umpire 18.3.4
Sampled population 18.4.4
Sampler 7.3;   19.3.1
- dichotomous 19.3.1
Sampling cryogenic 19.3.1
- error 18.3.2
- grab 19.3.1
- interval 8.4
- isokinetic 19.3.1
- multistage 18.3.4
- plan 10.3.4.9.1;   18.3.2
- sources 10.2
- time 8.4
- train 19.3.1
- unit 10.3.4.9.1
- valve (see Bypass injector 9.2.2.1)
Sandwich chamber 9.2.2.2
- immunoassay 19.2.3
Satellites (spectral lines) 10.3.2.1.7
Saturable dye-switch 10.3.1.6.5; 10.3.4.8.2
Saturated development 9.2.2.2
- solution 9.5
- vapour pressure 12.4.4
Saturation 9.5;   16.2
- activity 16.2
- capacity 9.4.3
- chamber 9.2.2.2
- effect 10.2.1.3.4
- loading 9.4.3
- plateau 10.3.4.3.5
Saturator 10.3.4.3.5
Saw-tooth shaped grooves 10.3.2.1.3
Scale (of a measuring instrument) 18.2.4
- zero point of 4.2
Scanning Auger microscopy 17.2.4
- electron microscopy 17.3
- - spectroscopy for chemical analysis 17.2.1.5
- finesse 10.3.2.1.3
- laser analysis 10.3.4.7.2
- transmission electron microscopy 17.3; 17.7.3
- tunnelling microscopy 17.7.3
Scatter lines 10.3.2.1.7
Scattering 10.3.2.1.1
- angle 11.2
- asymmetry factor for 11.2
- back 11.2
- cross-section 11.2
- efficiency 11.2
- elastic 10.2.1.1.5;   11.2;   12.5.1
- errors 10.3.5.2.10
- forward 11.2
- inelastic 10.2.1.1.5;   11.2;   12.5.1
- matrix 11.2
- Mie 10.2.1.1.5
- multiple 11.2
- plane 11.2
- quasielastic 11.2
- Raman 10.2.1.1.5;   10.3.6.3.8
- Rayleigh 10.2.1.1.5
- single 11.2
Scavenger 9.5; (see also Collector 19.3.1)
Scavenging 16.2; 19.3.1
Schenck sensitization mechnanism 11.2
Schottky photodiode 10.3.2.5
Scintillation 16.2
- counter 10.3.2.3.6
- detector 16.2
Scintillator 10.3.2.3.6;   10.3.2.7;   11.2; 16.2
Scrub feed 9.4.4
- liquor* 9.4.4
- product solution 9.4.4
- raffinate 9.4.4
- solution* 9.4.4
Scrubber 19.3.1
Scrubbing 9.4.4;   19.3.1
- agent 9.4.4
- - solution (see Scrubbing agent 9.4.4)
- coefficient* (see Scrubbing ratio 9.4.4)
- isotherm 9.4.4; (see also Distribution isotherm 9.4.1)
- ratio 9.4.4
Sealed bellows valve 12.4.4
- hollow cathode lamps 10.3.1.5.7
Second Rayleigh criterion 10.3.2.1.6
Secondary atomization surface 10.3.4.5.2
- combustion zone 10.3.4.2.2
- discharge 10.3.1.5.7
- electron multiplier 12.4.1
- excitation 10.3.4.8.2
- fluorescence 10.2.1.2.7
- ion mass spectrometry 17.3; 17.7.2
- - yield 17.4
- pollution 19.3.1
- radiation 10.2.1.2.3
- standard 6.2;   18.8.1
- - solution 6.2
Sedimentation 19.3.1
- coefficient 1.3.11;   9.7
- velocity 9.7
Seeded arcs 10.3.4.1.5
Segment 7.3;   18.3.3
Selected area electron diffraction (see Transmission high energy electron diffraction 17.3)
- ion monitoring 12.3.3.1
Selection rules 10.3.4.8.2;   11.2
Selective detector 9.2.4.1;   10.3.2.3.3
- digestion 10.3.4.9.5
- micro-sample 10.3.4.9.3
- sample 18.3.4
- scrubbing 9.4.4
- volatilization 10.3.4.9.5
Selectivity coefficient 9.2.5.5
- coefficient* 9.4.3
- - corrected 9.2.5.5
- - potentiometric 8.3.2.1
- constant* (see Potentiometric selectivity coefficient 8.3.2.1)
- factor (see Potentiometric selectivity coefficient 8.3.2.1)
- ratio 9.4.3
Self-absorption 10.2.1.1.3;   10.3.4.8.2;   11.2; 16.2
- broadening 10.2.1.1.3
- effect 10.3.6.4.2
- factor 16.2
Self-electrode 10.3.4.1;   10.3.4.9.2
Self-ignited spark discharge 10.3.1.3.3
Self-quenching 11.2
Self-reversal 10.2.1.1.3
Self-shielding 16.2
SEM 17.3
Semi-conducting surface 10.3.1.5.4
Semiconductor bolometer 10.3.2.3.5
- detector 10.3.2.3.3;   16.2
Semi-Q-switched 10.3.1.6.5
Semi-transparent mirror 10.3.1.6.1
Sensitivity 4.2 ;   10.3.2.3.4;   10.3.3.1.2; 12.4.1;   18.2.4; 18.4.3.2
- abundance 12.4.2
- detector 9.2.4.2
Sensitization 11.2
Sensitized luminescence 10.2.1.3.7
Sensitizer 11.2
Sensor 7.3;   18.2.4
- chemical 7.4
- contact 7.3
- electrochemical 7.4
- external 7.3
- magnetic 7.4
- mass sensitive 7.4
- optical 7.4
- - verification 7.3
- proximity 7.3
- receptor part of 7.4
- tactile 7.3
- thermometric 7.4
- transducer part of 7.4
Sensory control 7.3
Separate solution method (SSM) I-II 8.3.2.3
Separated flame 10.3.4.2.2
Separation, analytical 9.1; 10.3.4.9.6
- coefficient* 9.4.3
- distance 11.2
- factor 9.2.3.7;   9.2.5.5;   9.4.3
- isobaric 9.2.7.5
- isopycnic 9.2.7.5
- number 9.2.3.10
- radiochemical 16.2
- temperature 9.2.3.5
Sequential access 10.3.2.6
- pyrolysis 5.3
- sample 18.3.4
- spectrometer 10.3.2.1.2
Serial processing 7.3
Series 2.2
- ignition 10.3.1.3.4
Serum 19.2.1
Servocontrolled robot 7.3
Servomechanism 7.3
SESCA 17.2.1.5
Setting time 10.3.2.3.4
Settling error 10.3.5.2.10
SEXAFS 17.2.1.4; 17.7.3
Seya-Namioka mounting 10.3.2.1.9
Shape resonances 10.3.4.8.2
Shatter-box mill 10.3.4.9.3
Shattered 10.3.4.9.4
Sheet samples 10.3.4.9.2
Shewhart control charts 18.6.1
Shielded electrical discharge 10.3.1.2.7
- flame 10.3.4.2.2
Shielding constant (in NMR) 1.3.5
Shift, bathochromic 11.2
- chemical 17.4
- collisional 10.2.1.1.3
- hypsochromic 11.2
- reagents 14.3.2
- red 11.2
- solvent 11.2
- Stark 10.2.1.1.3
- wavelength 10.3.5.2.11
Short circuit discharge 10.3.1.5.8
Shot noise 10.3.2.3.4
Shoulder 7.3
Shpol'skii spectra 10.3.6.1
Shredding 10.3.4.9.3
Shut-down state 7.4
- time 7.4
SI (see International System of Units SI 18.2.1)
- base units 1.4.1 ,1.4.2
- derived units 1.4.3 1.4.4
Si:As photoconductive detectors 10.3.2.5
Sievings 10.3.4.9.3
Sifter electrode 10.3.4.1.2
Signal 7.4
- analogue 12.4.3
- conditioning 12.4.3
- digital 12.4.3
- domain 18.4.3.7
- processing 12.4.3
- - stat method 15.2
Significance level (see Confidence level 2.3)
Silica tube atomizer 10.3.4.5.2
Silicon doped with arsenide detector 10.3.2.5
- - intensified-target vidicon 10.3.2.6
- photodiode 10.3.6.2.3
- - array 10.3.5.1.3
- target 10.3.2.6
SIMS 17.3;   17.7.2
Simulation technique 10.3.4.3.5
Simultaneous analytical systems 10.3.1.4.4
- comparison method 15.2
- pair transitions 11.2
- reactions 15.2
- spectrometer 10.3.2.1.2
- techniques 5.2.3
Single bead string reactor (SBSR) 7.3
- -beam (luminescence) spectrometer 10.3.6.2.2
- drop sweep polarography 8.5.3
- -focusing mass spectrometer 12.2
- photon counting 11.2
- - timing 11.2
- pulse 10.3.1.6.5
- scattering 11.2
- spark 10.3.1.3.2
Singlet molecular oxygen 11.2
- state 11.2
- -singlet absorption 10.2.1.3.6
- - annihilation 11.2
- - energy transfer 11.2
- -triplet energy transfer 11.2
Singly- doubly- triply- etc. charged ion 12.3.2
- ionized element 10.3.1.4.3
Sink (see Emission 19.3.1)
Sintering 10.3.4.9.5
SIT vidicon 10.3.2.6
Sited membranes (see Membrane sites 8.3.2.1)
Sites, of membrane 8.3.2.1
Size-exclusion chromatography (see Exclusion chromatography 9.2.1.5)
Slide 7.3
Sliding spark 10.3.1.3.7
Slit 10.3.2.1.3
- height 10.3.2.1.3
- length 10.3.2.1.3
- optimal length of 10.3.2.1.6
- - width of 10.3.2.1.6
- width 10.3.2.1.3
Slope 2.4
- method 15.2
Slot-burners 10.3.4.2.2
Slurry 10.3.4.9.4
Smog, photochemical 11.2
Smoke 19.3.1
Soap film flowmeter (see Flowmeter 19.3.1)
Soft X-ray appearance potential spectroscopy 17.2.3.pdf
- X-ray emission spectroscopy 17.2.2.2
- - photoelectron spectroscopy 17.2.1.2
Software 7.3;   12.4.3
Solar blind detector 10.3.2.3.6
- -blind PMT 10.3.2.3.6
- conversion efficiency 11.2
Solenoid 7.3
- valve 12.4.4
Solid active 9.2.3.1
- active, modified 9.2.3.1
- -sample holders 10.3.5.1.2
- solution 9.5
- state laser 11.2
- support 9.2.3.1
Solubility 9.5
- product 9.5
Solubilization 10.3.4.9.5
Solute 9.2.1.1;   9.5
- distance 9.2.3.8
- -volatilization interferences 10.3.4.3.4
Solution 9.2.5.2;   9.5
- absorbing 10.3.4.6.2
- bridge 3.4.12
- external 9.2.5.2
- filling 3.4.12
- internal filling 3.4.12
- ionic strength of 8.3.2.3; 8.3.2.1
- normal* 6.3
- pH-adjustment 8.3.2.1
- primary standard 6.2
- saturated 9.5
- secondary standard 6.2
- solid 9.5
- standard 6.2
- standardized 6.2
Solvent 9.2.1.1;   9.2.5.2;   9.4.2; 9.5
- effects 10.3.6.4.4
- extraction 9.4.1
- front (see Mobile-phase front 9.2.3.8)
- inventory 9.4.4
- ion exchange* 9.4.1
- loss 9.4.4
- purification 9.4.4
- regeneration 9.4.4
- shift 11.2
Sonoluminescence 11.2
Sorbent (see Stationary phase 9.2.1.1)
Sorption 9.2.5.1
- isotherm 9.2.5.1
Source 10.3.1.5;   19.3.1
- emission 19.3.1
- primary 10.3.1.1.1
- pulsed laser 10.3.1.6.1
- radioactive 16.2
- rectified 10.3.4.1.4
- supplementary 10.3.4.7.1
Space charge 10.3.1.5.3
- of joint 7.3
SPAES 17.2.4
Span (see Range and span 8.3.2.1)
Spark chamber 10.3.1.3.6
- channel 10.3.1.3.2
- controlled duration 10.3.1.3.2
- cross-excitation 10.3.4.7.1
- dc 10.3.1.3.1
- discharge externally ignited 10.3.1.3.4
- electrical 10.3.1.3
- erosion 10.3.4.9.2
- frequency 10.3.1.3.2
- generator 10.3.1.3
- - controlled high voltage 10.3.1.3.3
- - medium voltage 10.3.1.3.4
- graphite 10.3.4.2.1
- high voltage 10.3.1.3.3
- ignition 10.3.1.2.2;   10.3.1.3
- ionization 12.3.1
- medium voltage 10.3.1.3.4
- oscillating 10.3.1.3.2
- repetition rates 10.3.1.3.2
- single 10.3.1.3.2
- sliding 10.3.1.3.7
- stand 10.3.1.3.6
- vacuum 10.3.1.3.7
Sparking equilibrium 10.3.4.2.1
Spatial distribution interference 10.3.4.3.4; 10.3.1.4.8
- distribution of radiation 10.3.1.5.1
- resolution 7.3;   10.3.2.6
- stabilization 10.3.1.2.3
Spatially resolved measurements 10.3.2.3.3
- resolving detectors 10.3.2.6
Spear samples 10.3.4.9.3
Speciation 10.3.4.9.5; 10.3.4.9.7
Specific (decadic) absorption coefficient 10.3.5.2.2
- detector 9.2.4.1
- interference 10.3.4.3.4
- optical rotatory power 1.3.6
- permeability 9.2.3.2
- photon emission 11.2
- quantity 1.2
- resolution 9.2.6.3
- retention volume at 0 °C 9.2.3.7
- - volume at column temperature 9.2.3.7
- volume 9.7
- - partial 9.7
Specificity 19.2.3
Specimen 5.2.2; 18.3.3
- - holder assembly 5.2.2
Spectral apparatus 10.3.2.1.1
- background 10.3.1.3.8
- - absorbance 10.3.5.2.3
- band 10.3.2.1.1
- - selection 10.3.2.1.7
- bandwidth error 10.3.5.2.10
- distribution 10.3.5.1.1
- (photon) effectiveness 11.2
- filters 10.3.2.1.1
- instrument 10.3.2.1.1
- intensity 1.3.6;   10.2.1.2.1
- interferences 10.3.4.3.4
- irradiance 10.3.2.3.2;   11.2
- line source 10.3.2.1.6; 10.3.5.1.1
- luminous efficacy 10.2.1
- optical conductance of a monochromator 10.3.2.1.6
- overlap 11.2
- photon flow 11.2
- - flux 11.2
- - radiance 11.2
- power 10.3.2.3.2
- purity 10.3.2.1.6
- radiance 10.3.1.5.5;   10.2.1;   10.3.5.1.1; 11.2
- radiant energy 10.3.2.3.2
- - energy density 1.3.6;   10.3.1.1.4
- - exposure 10.3.2.3.2
- - flux 11.2
- - intensity 11.2
- - power 11.2
- radiation quantities 10.2.1
- responsivity 10.3.2.3.4; 11.2
- - function 10.3.2.3.4
- sensitivity 11.2
- sensitization 11.2
- width effective 10.3.2.1.6
Spectrochemical additives 10.3.4.1.6
- buffer 10.3.4.3.5;   10.3.4.1.6
- carrier 10.3.4.1.6
- diluent 10.3.4.1.6
Spectrograph 10.3.2.1.2
- Echelle 10.3.2.1.10
Spectrography 10.2
Spectrometer 10.3.2.1.2
- Echelle 10.3.2.1.10
- filter 10.3.2.1.2
- flame atomic absorption 10.3.4.3.4
- - atomic fluorescence 10.3.4.3.4
- Fourier transform 11.2
- multiplex 10.3.2.1.2
- sequential 10.3.2.1.2
- simultaneous 10.3.2.1.2
- single-beam 10.3.6.2.2
Spectrometry 10.2
- atomic absorption 10.2;   10.3.4.4
- - fluorescence 10.2
- electrothermal atomic absorption 10.3.4.5.1
- - atomic emission 10.3.4.5.1
- - atomic fluorescence 10.3.4.5.1
- flame atomic absorption 10.3.4.3.4
- - atomic fluorescence 10.3.4.3.4
- - emission 10.3.4.3.4
- Fourier transform 10.3.2.1.2
- furnace atomic non-thermal excitation 10.3.4.5.2
- inductively coupled plasma emission 10.2
- optical emission 10.3.4
Spectrophotometric titration 6.2
Spectroscope 10.3.2.1.2
Spectroscopy, atomic emission 10.3.4 ;   10.2
- difference absorption 10.3.5.2.4
- direct current arc optical emission 10.2
- double-wavelength 10.3.5.2.5
- molecular absorption 10.2
- - luminescence 10.2
- optical emission 10.2 ;   10.3.4
- optoacoustic 11.2
- photoacoustic 11.2
- photoelectron 10.3.4.8.3 ;   11.2
- time-resolved 10.3.1.3.8 ;   11.2
- transient 11.2
- X-ray emission 10.2
- - fluorescence 10.2
Spectrum conversion 11.2
- derivative 10.3.5.1.3
- efficiency 11.2
- emission 11.2
- excitation 11.2
- - corrected 11.2
- ionic 10.3.4.1.5
- power 10.3.2.3.4
- synchronously excited 10.3.6.3.4
Speed 7.3
- of exhaust 12.4.4
- factor 12.4.4
- of light in medium 1.3.6
- - in vacuum 1.3.6
Spherical coordinate robot 7.3
- coordinate system 7.3
- radiant exposure 11.2
SPIES 17.2.6 ;   17.7.4
Spike power 10.3.1.6.4
Spiking 18.6.1
Spin-allowed electronic transition 11.2
- conservation rule 10.2.1.3.6 ;   11.2
- doublets 10.3.4.8.2
- -flip 11.2
- -orbit coupling 11.2
- - splitting 11.2
- polarized Auger electron spectroscopy 17.2.4
- - inverse photoemission spectroscopy 17.2.1.4
- -spin coupling 11.2
SPIPES 17.2.1.4
Spirometer (see Flowmeter 19.3.1)
Splash samples 10.3.4.9.2
Split injection 9.2.2.1
Splitting, by crystal field 11.2
- Davydov 11.2
- factor group 11.2
- by ligand field 11.2
- line 14.2.1
- spin-orbit 11.2
Spontaneous emission 11.2
- emission, transition probability for 10.3.1.1.4
Spot 9.2.3.3
- diameter 9.2.3.3
Spotting device 9.2.2.2
Spray chamber 10.3.4.2.2
- discharge 10.3.1.5.4
Spread time 10.3.2.3.4
Sputter yield 17.4
Sputtering 10.3.4.9.2 ;   17.4
- cathodic 10.3.1.5;   10.3.1.5.3
- rate 10.3.1.5.3
- yield 10.3.1.5.3
Sputter-ion pump 12.4.4
Square-wave current 8.4
- polarography 8.5.3
SRPES 17.2.1.4
Stability 7.3 ;   18.2.4 ;   18.8.1
Stabilization, temporal 10.3.1.2.3
Stabilized arcs 10.3.1.2.1
- current supplies 10.3.4.1.4
- temperature atomization 10.3.4.5.3
- voltage supply 10.3.4.1.4
Stable ion 12.3.2
Stack sampling 19.3.1
Stage 9.4.4
Stagewise contactor 9.4.4
Standard acceleration of free fall 1.5 ; 9.7
- addition 8.3.2.1
- deviation 2.3 ;   9.2.3.3 ;   10.3.3.1.3 ;   18.4.3.5
- - for counting 10.3.3.1.6
- - experimental 18.2.3
- - of the intercept 2.4
- - from paired data 2.3
- - percentage 2.3
- - of points about the fitted line 2.4
- - pooled (see Standard deviation from grouped data 2.3)
- - relative 2.3
- - residual (see Standard deviation of points about the fitted line 2.4)
- - of the slope 2.4
- electrode potential 1.3.10
- emf 1.3.10
- external 9.2.3.3
- internal 9.2.3.3
- observer 10.2.1
- primary 6.2 ;   18.8.1
- secondary 6.2 ;   18.8.1
- solution 6.2
- substances 6.2
- substraction 8.3.2.1
Standardized solution 6.2
Stand-by state 7.4
Stark broadening 10.2.1.1.3
- effect 11.2
- shift 10.2.1.1.3
Starting line 9.2.3.3
- point 9.2.3.3
Start-up time 7.4
State crossing 11.2
- diagram 11.2
- shut-down 7.4
- stand-by 7.4
Static 7.3
- compliance 7.3
- fields mass spectrometer 12.2
- magnetic field 14.2.1
- quenching 11.2
- system 10.3.4.6.3
Stationary electrode voltammetry 8.5.3
- mobile-phase volume (see Intraparticle volume of the column 9.2.6.1)
- phase 9.2.1.1
- - mass of 9.2.3.2
- - volume of 9.2.3.2
- - weight of 9.2.3.2
- radiation conditions 10.3.4.1.2
Statistical control 18.6.1
Steady state 9.4.4 ;   10.3.1.4.4 ;   15.2
Stefan-Boltzmann constant 1.3.6 ; 1.5
STEM 17.3 ; 17.7.3
Step 9.2.3.3 ;   9.4.4
- height 9.2.3.3
Stepwise elution 9.2.1.6
- heating 10.3.4.5.3
- pyrolysis 5.3
- reaction (see Composite reaction 15.2)
Stern-Volmer law 10.3.6.3.6
- kinetic relationships 11.2
Sticking coefficient 12.4.4
Stigmatic arrangement 10.3.2.1.1
Stimulated emission 10.3.1.6.1 ;   11.2
- emission, transition probability for 10.3.1.1.4
Stimulus (see Measurement signal 18.2.2)
STM 17.7.3
Stoichiometric capacity 9.4.3
- end point 6.2
Stokes parameters 11.2
- shift 11.2
- type 10.2.1.3.8
- vector 10.3.2.1.7
Stopped-flow 10.3.4.5.2
- cell 10.3.5.1.2
- method 15.2
Stop-point (in robotics) 7.3
Straight slits 10.3.2.1.3
- through valve 12.4.4
Stratified sample 18.3.4
Stray radiation 10.3.2.1.6 ;   10.3.5.2.10
- radiation error 10.3.5.2.10
- - factor 10.3.2.1.6
Streak camera 10.3.2.7
- tube 10.3.2.7
Striations 10.3.1.5.1
Strip dynode photomultiplier 10.3.2.3.6
- liquor* 9.4.4
- product solution 9.4.4
- raffinate* 9.4.4
- solution 9.4.4
Stripping 9.4.4
- agent 9.4.4
- - solution 9.4.4
- coefficient* (see Stripping ratio 9.4.4)
- isotherm (see Distribution isotherm 9.4.1)
- ratio 9.4.4
Strips 10.3.4.5.2
Strobe interval 8.4
Structure, articulated 7.3
Sublation 9.4.1
Submultiple of a unit (of measurement) 18.2.1
Subroutine 7.3
Subsample 18.3.6
Subsampling 10.3.4.9.1
Substance concentration 9.7
- electroactive 8.4
- interfering 8.3.2.1
- standard 6.2
Substoichiometric extraction 9.4.1
Substrate 15.2 ;   19.2.2
Subtractive double monochromator 10.3.2.1.1
Suction nebulizers 10.3.4.2.2
Summit current 8.4
- potential 8.4
Superconductor bolometer 10.3.2.3.5
Supercritical fluid 9.2.7.1
- fluid extraction 9.2.7.7
- - chromatography 9.2.1.4
Superelastic collision 12.5.1
Superradiance 11.2
Supersaturated solution 9.5
Supersaturation 9.5
Supplementary discharge 10.3.1.5.7
- electrodes 10.3.1.5.7
- source 10.3.4.7.1
Support, solid 9.2.3.1
-coated open-tubular column 9.2.3.2
Supporting electrolyte 8.4
Suppressors 10.3.4.3.5
Surface 17.4
- analysis 10.3.4.9.3
- charge density 1.3.3
- concentration 1.3.7 ;   17.4
- contamination 17.4
- coverage 1.3.11 ;   17.4
- crossing 11.2
- defects finesse 10.3.2.1.3
- density 1.3.2
- extended X-ray absorption fine structure (spectroscopy) 17.2.1.4 ;   17.7.3
- ionization 12.3.1
- penning ionization electron spectroscopy 17.2.6 ; 17.7.4
- reaction 8.4
- spark 10.3.1.3.7
- tension 1.3.2 ;   1.3.8 ;   1.3.11
Susceptance 1.3.3
Suspension effect 8.3.2.1
SXAPS 17.2.3
SXES 17.2.2.2
SXPS 17.2.1.2
Symbol of a unit (of a measurement) 1.4 ; 18.2.1
Synchronously excited (fluorescence phosphorescence) spectrum 10.3.6.3.4
- rotating gap 10.3.1.3.3
Synchrotron radiation 10.3.4.8.2
- radiation photoelectron spectroscopy 17.2.1.4
Synergic* (see Synergism 9.4.1)
Synergism 9.4.1
Synergistic* (see Synergism 9.4.1)
Syringe hand 7.3
- pumps 9.2.2.1
System 7.2
- robot 7.3
- of units (of measurement) 1.4 ; 18.2.1
Systematic error 18.2.3 ; 18.4.3.5 ; 18.6.1; (see also Bias 2 ; 3)
Systems engineering 7.2
Szilárd-Chalmers effect 16.2